Pad Mount Tilt Down Tower

Current Stock:
0
SKU:
505101
Condition:
New
Availability:
5-6 weeks lead time
Weight:
150.00 LBS
Shipping:
Calculated at Checkout

Pad Mount Tilt Down Tower

Unique design eliminates the need for ratchet winches or cables. This ground mount tower can easily be installed on a concrete pad to extend antenna up to 16 feet above hinge-point.

Available from 8ft -16ft overall height extension. Tower rated up to 10lbs payload with a max size of 144 in2 surface area.

Each custom height tower is built using an industrial gas shock and sized for the particular tower height. This ensures correct tilting action each time with minimal effort and safety for the operator.

The tower is key lockable in both the up and down positions

Ease of device maintenance - Tower tilts down to service antenna and devices safely. One person required without need of additional safety equipment.

Solid steel mount, with aluminum tower riser sections.

Powercoated steel components, aluminum non-coated.

Mounting holes provided to attach standard unistrut to back side of tower base to mount electrical enslosures as needed

Application:

  • LTE cellular antenna
  • Other light weight/low surface area antennas.

Specifications:

  • Min and Max Height - 8-16 ft. (from hinge point)
  • Maximum overall height - 17' 6" (from ground)
  • Weight: 144 lbs (without payload)
  • Mast sections tubing: 2.5" OD
  • Mast sections length: 48"
  • Final upper section for antenna mounting: 2" OD
  • Total force to raise and lower mast: <15 LBS
  • Base plate dimensions: 15" x 13"
  • Base plate bolt hole centers: 13" x 11"
  • Anchor hole diameter in base plate: 5/8" (4X)

Mounting and Base Requirements:

  • Concrete pad size recommended: 42" x 42" x 9" (LWH)
  • Concrete: 3500 psi min.
  • Rebar: #4 on 9" centers grate top and bottom.
  • Minimum anchor sizing: 1/2" OD x 6"(8"OAL) adhesive imbedded or 1/2"OD x 10" J-Bolts(wet set)
  • Anchor fastening type recommended: Adhesive set threaded rod or Wet set J-Bolts.
  • Optional 105525-Template Alignment Support and Anchor Bolt Template (105526-Anchor Bolt Template) can be used to place wet set J-bolt anchors. See concrete installation guide below for more information.

Whats Included:

  • Pad Mount Tilt Tower

Downloads:

Pad Mount Tilt Down Tower specification sheet.

Pad Mount Specs

Concrete Pad Installation Guide.

         

Materials and Workmanship warrantied for the period of one year from date of purchase.