Wall Mount Tilt Down Tower

Wall Mount Tilt Down Tower

Unique design eliminates the need for ratchet winches or cables. his wall mount tower can easily be installed on the side of a building to extend antenna up to 16 feet above hinge-point.

Available from 8ft -16ft overall height extension. Tower rated up to 10lbs payload with a max size of 144 in2 surface area.

Each custom height tower is built using an industrial gas shock and sized for the particular tower height. This ensures correct tilting action each time with minimal effort and safety for the operator.

The tower is key lockable in both the up and down positions

Ease of device maintenance - Tower tilts down to service antenna and devices safely. One person required without need of additional safety equipment.

Solid steel mount, with aluminum tower riser sections.

Powercoated steel components, aluminum non-coated.

Mounting holes provided to attach standard unistrut to back side of tower base to mount electrical enslosures as needed

Application:

• LTE cellular antenna
• Other light weight/low surface area antennas.

Specifications:

• Min and Max Height - 8-16 ft. (from hinge point)
• Maximum overall height - 16' (add amount from ground to wall placement for OAH off ground)
• Weight: 110 lbs (without payload)
• Mast sections tubing: 2.5" OD
• Mast sections length: 48"
• Final upper section for antenna mounting: 2" OD
• Total force to raise and lower mast: <15 LBS
• Wall plate dimensions: 15" x 13"
• Wall plate bolt hole centers: 13" x 11"
• Anchor hole diameter in wall plate: 1/2" (4X)

Mounting and Wall Requirements:

• Concrete wall mounting recommended.
• Minimum anchor sizing: 1/2" OD x 6" adhesive imbedded or compression set
• If wall construction is other than concrete, use optional wall adapter.
• Optional wall adapter plate, 100524-Wall Mount Adapter Plate.  See adapter documentation for recommended anchors and bolts.

Whats Included:

• Wall Mount Mount Tilt Tower

Downloads:

Wall Mount Tilt Down Tower specification sheet.